时间：2019年4月26日 10:00-11:20

地点：bat365在线中国官网登录入口 F207会议室

邀请人：王倩 副教授（工程热物理研究所）

题目：Combustion of Bio-Oil

报告人：杨授印 教授（台湾虎尾科技大学）

报告人简介：

Professor Yang is currently a professor of the Department of Power Mechanical
Engineering at the Formosa University, and is also the Dean of Office of International Affairs of the Formosa University and serves as the Secretary General of the Combustion Institute of Taiwan. He received his Ph.D. in Mechanical Engineering from Central University in Taiwan in 2002 and was subsequently employed as a postdoctoral fellow at Princeton University (2003), working in the laboratory of Prof. C. K. Law. After returning to Taiwan, he joined the Industrial Technology Research Institute as a researcher. He began working at National Formosa University from 2009 until now. His research interests focus on combustion and biomass energy, including high pressure turbulent combustion, biomass pyrolysis and gasification technology, and spray combustion and droplet combustion of bio-oil etc.

报告摘要：

Biomass is the fourth largest energy source in the world. The combustion technology from ancient times began with biomass. Biomass provides many energies through combustion, which is a very important source of energy for human beings. Today's issues of biomass are more important because of global warming and energy issues. This study is aimed at pyrolysis oil production of cellulose biomass, the characteristics of different components of biomass through different pyrolysis processes, and exploring the conditions of pyrolysis and biomass components for bio-oil components and production. The results show that volatile substances in biomass oil will cause ignition delay changes. The length of the burning flame is shortened, while the flame oscillates and the overall combustion heat value decrease. The part of the macro-compounds of the bio-oil causes the atomization flow field of the spray combustion to change, as well as the particle generation and the nozzle coking phenomena. The study of droplet combustion shows that after the fossil fuel is mixed with the bio-oil, the combustion characteristics of the droplets are changed. These characteristics include micro-explosion, change in the burning rate of the droplets and soot tail, etc. These characteristics are also demonstrated by the change in atomization length and flow field characteristics of spray combustion. This research could provide an interesting research direction of bio-oil application and basic combustion dynamics.

题目：热冲压技术发展与应用

报告人：陈立纬 副教授（台湾虎尾科技大学）

报告人简介：

陈立纬，中国台湾虎尾科技大学副教授，副国际长。2003-2008年任职于台湾裕隆汽车集团，
参与Mitsubishi 及Nissan车型开发工作，2012年在英国谢菲尔德大学机械工程学系获得博士学位，2013年转任教职，其研究工作包含金属成形分析、热流分析及燃烧工程等，已发表学术论文约50篇，专利3项，现阶段研究主要专注于金属成形分析及加工方法改善，包含成形模拟分析技术及成形实验，研究方向主要着重在汽车车身零件成形分析、自行车零件成形分析、热冲压技术发展及成形设备开发等。

报告摘要：

热冲压 (Hot-Stamping) 为冲压界新颖的成形技术之一，主要是利用金属板材在高温下具有高塑性、高延展性的性质，在透过模具进行模内淬火及成形，使板材获得超高强度的特性，其抗拉强度可达1400MPa以上，吾人之研究着重于提升热冲压技术，并拓展热冲压技术的应用，包含热冲压模拟分析、模具冷却水道之分析研究、差异温差模、无钉铆接连接技术、模内加热技术及热冲压制程测试设备开发等。